W3cubDocs

/Ansible

iosxr_command - Run commands on remote devices running Cisco IOS XR

New in version 2.1.

Synopsis

  • Sends arbitrary commands to an IOS XR node and returns the results read from the device. This module includes an argument that will cause the module to wait for a specific condition before returning or timing out if the condition is not met.
  • This module does not support running commands in configuration mode. Please use iosxr_config to configure iosxr devices.

Options

parameter required default choices comments
commands
 yes
List of commands to send to the remote iosxr device over the configured provider. The resulting output from the command is returned. If the wait_for argument is provided, the module is not returned until the condition is satisfied or the number of retries has expired.
interval
 no 1
Configures the interval in seconds to wait between retries of the command. If the command does not pass the specified conditions, the interval indicates how long to wait before trying the command again.
match
(added in 2.2)
 no all
  • any
  • all
The match argument is used in conjunction with the wait_for argument to specify the match policy. Valid values are all or any. If the value is set to all then all conditionals in the wait_for must be satisfied. If the value is set to any then only one of the values must be satisfied.
provider
 no
A dict object containing connection details.
Dictionary object provider
parameter required default choices comments
username
 no
Configures the username to use to authenticate the connection to the remote device. This value is used to authenticate the SSH session. If the value is not specified in the task, the value of environment variable ANSIBLE_NET_USERNAME will be used instead.
host
 yes
Specifies the DNS host name or address for connecting to the remote device over the specified transport. The value of host is used as the destination address for the transport.
ssh_keyfile
 no
Specifies the SSH key to use to authenticate the connection to the remote device. This value is the path to the key used to authenticate the SSH session. If the value is not specified in the task, the value of environment variable ANSIBLE_NET_SSH_KEYFILE will be used instead.
timeout
 no 10
Specifies the timeout in seconds for communicating with the network device for either connecting or sending commands. If the timeout is exceeded before the operation is completed, the module will error.
password
 no
Specifies the password to use to authenticate the connection to the remote device. This value is used to authenticate the SSH session. If the value is not specified in the task, the value of environment variable ANSIBLE_NET_PASSWORD will be used instead.
port
 no 22
Specifies the port to use when building the connection to the remote. device.
retries
 no 10
Specifies the number of retries a command should by tried before it is considered failed. The command is run on the target device every retry and evaluated against the wait_for conditions.
wait_for
(added in 2.2)
 no
List of conditions to evaluate against the output of the command. The task will wait for each condition to be true before moving forward. If the conditional is not true within the configured number of retries, the task fails. See examples.
aliases: waitfor

Examples

tasks:
  - name: run show version on remote devices
    iosxr_command:
      commands: show version

  - name: run show version and check to see if output contains iosxr
    iosxr_command:
      commands: show version
      wait_for: result[0] contains IOS-XR

  - name: run multiple commands on remote nodes
    iosxr_command:
      commands:
        - show version
        - show interfaces

  - name: run multiple commands and evaluate the output
    iosxr_command:
      commands:
        - show version
        - show interfaces
      wait_for:
        - result[0] contains IOS-XR
        - result[1] contains Loopback0

Return Values

Common return values are documented here Return Values, the following are the fields unique to this module:

name description returned type sample
stdout_lines
The value of stdout split into a list
 always apart from low level errors (such as action plugin) list [['...', '...'], ['...'], ['...']]
stdout
The set of responses from the commands
 always apart from low level errors (such as action plugin) list ['...', '...']
failed_conditions
The list of conditionals that have failed
 failed list ['...', '...']

Notes

Note

  • Tested against IOS XR 6.1.2

Status

This module is flagged as preview which means that it is not guaranteed to have a backwards compatible interface.

Maintenance Info

For more information about Red Hat’s this support of this module, please refer to this knowledge base article<https://access.redhat.com/articles/rhel-top-support-policies>

For help in developing on modules, should you be so inclined, please read Community Information & Contributing, Testing Ansible and Developing Modules.

© 2012–2017 Michael DeHaan
© 2017 Red Hat, Inc.
Licensed under the GNU General Public License version 3.
https://docs.ansible.com/ansible/latest/iosxr_command_module.html