.htaccess
files provide a way to make configuration changes on a per-directory basis.
Related Modules | Related Directives |
---|---|
.htaccess
files completely if you have access to httpd main server config file. Using .htaccess
files slows down your Apache http server. Any directive that you can include in a .htaccess
file is better set in a Directory
block, as it will have the same effect with better performance..htaccess
files (or "distributed configuration files") provide a way to make configuration changes on a per-directory basis. A file, containing one or more configuration directives, is placed in a particular document directory, and the directives apply to that directory, and all subdirectories thereof.
Note:
If you want to call your .htaccess
file something else, you can change the name of the file using the AccessFileName
directive. For example, if you would rather call the file .config
then you can put the following in your server configuration file:
AccessFileName ".config"
In general, .htaccess
files use the same syntax as the main configuration files. What you can put in these files is determined by the AllowOverride
directive. This directive specifies, in categories, what directives will be honored if they are found in a .htaccess
file. If a directive is permitted in a .htaccess
file, the documentation for that directive will contain an Override section, specifying what value must be in AllowOverride
in order for that directive to be permitted.
For example, if you look at the documentation for the AddDefaultCharset
directive, you will find that it is permitted in .htaccess
files. (See the Context line in the directive summary.) The Override line reads FileInfo
. Thus, you must have at least AllowOverride FileInfo
in order for this directive to be honored in .htaccess
files.
Context: | server config, virtual host, directory, .htaccess |
Override: | FileInfo |
If you are unsure whether a particular directive is permitted in a .htaccess
file, look at the documentation for that directive, and check the Context line for ".htaccess".
In general, you should only use .htaccess
files when you don't have access to the main server configuration file. There is, for example, a common misconception that user authentication should always be done in .htaccess
files, and, in more recent years, another misconception that mod_rewrite
directives must go in .htaccess
files. This is simply not the case. You can put user authentication configurations in the main server configuration, and this is, in fact, the preferred way to do things. Likewise, mod_rewrite
directives work better, in many respects, in the main server configuration.
.htaccess
files should be used in a case where the content providers need to make configuration changes to the server on a per-directory basis, but do not have root access on the server system. In the event that the server administrator is not willing to make frequent configuration changes, it might be desirable to permit individual users to make these changes in .htaccess
files for themselves. This is particularly true, for example, in cases where ISPs are hosting multiple user sites on a single machine, and want their users to be able to alter their configuration.
However, in general, use of .htaccess
files should be avoided when possible. Any configuration that you would consider putting in a .htaccess
file, can just as effectively be made in a <Directory>
section in your main server configuration file.
There are two main reasons to avoid the use of .htaccess
files.
The first of these is performance. When AllowOverride
is set to allow the use of .htaccess
files, httpd will look in every directory for .htaccess
files. Thus, permitting .htaccess
files causes a performance hit, whether or not you actually even use them! Also, the .htaccess
file is loaded every time a document is requested.
Further note that httpd must look for .htaccess
files in all higher-level directories, in order to have a full complement of directives that it must apply. (See section on how directives are applied.) Thus, if a file is requested out of a directory /www/htdocs/example
, httpd must look for the following files:
/.htaccess /www/.htaccess /www/htdocs/.htaccess /www/htdocs/example/.htaccess
And so, for each file access out of that directory, there are 4 additional file-system accesses, even if none of those files are present. (Note that this would only be the case if .htaccess
files were enabled for /
, which is not usually the case.)
In the case of RewriteRule
directives, in .htaccess
context these regular expressions must be re-compiled with every request to the directory, whereas in main server configuration context they are compiled once and cached. Additionally, the rules themselves are more complicated, as one must work around the restrictions that come with per-directory context and mod_rewrite
. Consult the Rewrite Guide for more detail on this subject.
The second consideration is one of security. You are permitting users to modify server configuration, which may result in changes over which you have no control. Carefully consider whether you want to give your users this privilege. Note also that giving users less privileges than they need will lead to additional technical support requests. Make sure you clearly tell your users what level of privileges you have given them. Specifying exactly what you have set AllowOverride
to, and pointing them to the relevant documentation, will save yourself a lot of confusion later.
Note that it is completely equivalent to put a .htaccess
file in a directory /www/htdocs/example
containing a directive, and to put that same directive in a Directory section <Directory "/www/htdocs/example">
in your main server configuration:
.htaccess
file in /www/htdocs/example
:
/www/htdocs/example
AddType text/example ".exm"
httpd.conf
file<Directory "/www/htdocs/example"> AddType text/example ".exm" </Directory>
However, putting this configuration in your server configuration file will result in less of a performance hit, as the configuration is loaded once when httpd starts, rather than every time a file is requested.
The use of .htaccess
files can be disabled completely by setting the AllowOverride
directive to none
:
AllowOverride None
The configuration directives found in a .htaccess
file are applied to the directory in which the .htaccess
file is found, and to all subdirectories thereof. However, it is important to also remember that there may have been .htaccess
files in directories higher up. Directives are applied in the order that they are found. Therefore, a .htaccess
file in a particular directory may override directives found in .htaccess
files found higher up in the directory tree. And those, in turn, may have overridden directives found yet higher up, or in the main server configuration file itself.
Example:
In the directory /www/htdocs/example1
we have a .htaccess
file containing the following:
Options +ExecCGI
(Note: you must have "AllowOverride Options
" in effect to permit the use of the "Options
" directive in .htaccess
files.)
In the directory /www/htdocs/example1/example2
we have a .htaccess
file containing:
Options Includes
Because of this second .htaccess
file, in the directory /www/htdocs/example1/example2
, CGI execution is not permitted, as only Options Includes
is in effect, which completely overrides any earlier setting that may have been in place.
As discussed in the documentation on Configuration Sections, .htaccess
files can override the <Directory>
sections for the corresponding directory, but will be overridden by other types of configuration sections from the main configuration files. This fact can be used to enforce certain configurations, even in the presence of a liberal AllowOverride
setting. For example, to prevent script execution while allowing anything else to be set in .htaccess
you can use:
<Directory "/www/htdocs"> AllowOverride All </Directory> <Location "/"> Options +IncludesNoExec -ExecCGI </Location>
DocumentRoot
is /www/htdocs
.If you jumped directly to this part of the document to find out how to do authentication, it is important to note one thing. There is a common misconception that you are required to use .htaccess
files in order to implement password authentication. This is not the case. Putting authentication directives in a <Directory>
section, in your main server configuration file, is the preferred way to implement this, and .htaccess
files should be used only if you don't have access to the main server configuration file. See above for a discussion of when you should and should not use .htaccess
files.
Having said that, if you still think you need to use a .htaccess
file, you may find that a configuration such as what follows may work for you.
.htaccess
file contents:
AuthType Basic AuthName "Password Required" AuthUserFile "/www/passwords/password.file" AuthGroupFile "/www/passwords/group.file" Require group admins
Note that AllowOverride AuthConfig
must be in effect for these directives to have any effect.
Please see the authentication tutorial for a more complete discussion of authentication and authorization.
Another common use of .htaccess
files is to enable Server Side Includes for a particular directory. This may be done with the following configuration directives, placed in a .htaccess
file in the desired directory:
Options +Includes AddType text/html shtml AddHandler server-parsed shtml
Note that AllowOverride Options
and AllowOverride FileInfo
must both be in effect for these directives to have any effect.
Please see the SSI tutorial for a more complete discussion of server-side includes.
When using RewriteRule
in .htaccess
files, be aware that the per-directory context changes things a bit. In particular, rules are taken to be relative to the current directory, rather than being the original requested URI. Consider the following examples:
# In httpd.conf RewriteRule "^/images/(.+)\.jpg" "/images/$1.png" # In .htaccess in root dir RewriteRule "^images/(.+)\.jpg" "images/$1.png" # In .htaccess in images/ RewriteRule "^(.+)\.jpg" "$1.png"
In a .htaccess
in your document directory, the leading slash is removed from the value supplied to RewriteRule
, and in the images
subdirectory, /images/
is removed from it. Thus, your regular expression needs to omit that portion as well.
Consult the mod_rewrite documentation for further details on using mod_rewrite
.
Finally, you may wish to use a .htaccess
file to permit the execution of CGI programs in a particular directory. This may be implemented with the following configuration:
Options +ExecCGI AddHandler cgi-script cgi pl
Alternately, if you wish to have all files in the given directory be considered to be CGI programs, this may be done with the following configuration:
Options +ExecCGI SetHandler cgi-script
Note that AllowOverride Options
and AllowOverride FileInfo
must both be in effect for these directives to have any effect.
Please see the CGI tutorial for a more complete discussion of CGI programming and configuration.
When you put configuration directives in a .htaccess
file, and you don't get the desired effect, there are a number of things that may be going wrong.
Most commonly, the problem is that AllowOverride
is not set such that your configuration directives are being honored. Make sure that you don't have a AllowOverride None
in effect for the file scope in question. A good test for this is to put garbage in your .htaccess
file and reload the page. If a server error is not generated, then you almost certainly have AllowOverride None
in effect.
If, on the other hand, you are getting server errors when trying to access documents, check your httpd error log. It will likely tell you that the directive used in your .htaccess
file is not permitted.
[Fri Sep 17 18:43:16 2010] [alert] [client 192.168.200.51] /var/www/html/.htaccess: DirectoryIndex not allowed here
This will indicate either that you've used a directive that is never permitted in .htaccess
files, or that you simply don't have AllowOverride
set to a level sufficient for the directive you've used. Consult the documentation for that particular directive to determine which is the case.
Alternately, it may tell you that you had a syntax error in your usage of the directive itself.
[Sat Aug 09 16:22:34 2008] [alert] [client 192.168.200.51] /var/www/html/.htaccess: RewriteCond: bad flag delimiters
In this case, the error message should be specific to the particular syntax error that you have committed.
© 2017 The Apache Software Foundation
Licensed under the Apache License, Version 2.0.
https://httpd.apache.org/docs/2.4/en/howto/htaccess.html