W3cubDocs

/Jest

Jest CLI Options

The jest command line runner has a number of useful options. You can run jest --help to view all available options. Many of the options shown below can also be used together to run tests exactly the way you want. Every one of Jest's Configuration options can also be specified through the CLI.

Here is a brief overview:

Running from the command line

Run all tests (default):

jest

Run only the tests that were specified with a pattern or filename:

jest my-test #or
jest path/to/my-test.js

Run tests related to changed files based on hg/git (uncommitted files):

jest -o

Run tests related to path/to/fileA.js and path/to/fileB.js:

jest --findRelatedTests path/to/fileA.js path/to/fileB.js

Run tests that match this spec name (match against the name in describe or test, basically).

jest -t name-of-spec

Run watch mode:

jest --watch #runs jest -o by default
jest --watchAll #runs all tests

Watch mode also enables to specify the name or path to a file to focus on a specific set of tests.

Using with npm scripts

If you run Jest via npm test, you can still use the command line arguments by inserting a -- between npm test and the Jest arguments. Instead of:

jest -u -t="ColorPicker"

you can use:

npm test -- -u -t="ColorPicker"

CLI options take precedence over values from the Configuration.

Options

Reference

jest <regexForTestFiles>

When you run jest with an argument, that argument is treated as a regular expression to match against files in your project. It is possible to run test suites by providing a pattern. Only the files that the pattern matches will be picked up and executed. Note: depending on your terminal, you may need to quote this argument: jest "my.*(complex)?pattern".

--bail

Alias: -b. Exit the test suite immediately upon the first failing test suite.

--cache

Whether to use the cache. Defaults to true. Disable the cache using --no-cache. Note: the cache should only be disabled if you are experiencing caching related problems. On average, disabling the cache makes Jest at least two times slower.

If you want to inspect the cache, use --showConfig and look at the cacheDirectory value. If you need to clear the cache, use --clearCache.

--changedFilesWithAncestor

When used together with --onlyChanged or --watch, it runs tests related to the current changes and the changes made in the last commit.

--ci

When this option is provided, Jest will assume it is running in a CI environment. This changes the behavior when a new snapshot is encountered. Instead of the regular behavior of storing a new snapshot automatically, it will fail the test and require Jest to be run with --updateSnapshot.

--clearCache

available in Jest 22.0.0+

Deletes the Jest cache directory and then exits without running tests. Will delete cacheDirectory if the option is passed, or Jest's default cache directory. The default cache directory can be found by calling jest --showConfig. Note: clearing the cache will reduce performance.

--collectCoverageFrom=<glob>

Relative to the root directory, glob pattern matching the files that coverage info needs to be collected from.

--colors

Forces test results output highlighting even if stdout is not a TTY.

--config=<path>

Alias: -c. The path to a Jest config file specifying how to find and execute tests. If no rootDir is set in the config, the current directory is assumed to be the rootDir for the project. This can also be a JSON-encoded value which Jest will use as configuration.

--coverage

Indicates that test coverage information should be collected and reported in the output.

--debug

Print debugging info about your Jest config.

--env=<environment>

The test environment used for all tests. This can point to any file or node module. Examples: jsdom, node or path/to/my-environment.js.

--expand

Alias: -e. Use this flag to show full diffs and errors instead of a patch.

--findRelatedTests <spaceSeparatedListOfSourceFiles>

Find and run the tests that cover a space separated list of source files that were passed in as arguments. Useful for pre-commit hook integration to run the minimal amount of tests necessary.

--forceExit

Force Jest to exit after all tests have completed running. This is useful when resources set up by test code cannot be adequately cleaned up. Note: This feature is an escape-hatch. If Jest doesn't exit at the end of a test run, it means external resources are still being held on to or timers are still pending in your code. It is advised to tear down external resources after each test to make sure Jest can shut down cleanly.

--help

Show the help information, similar to this page.

--json

Prints the test results in JSON. This mode will send all other test output and user messages to stderr.

--outputFile=<filename>

Write test results to a file when the --json option is also specified.

--lastCommit

When used together with --onlyChanged, it will run all tests affected by file changes in the last commit made.

--listTests

Lists all tests as JSON that Jest will run given the arguments, and exits. This can be used together with --findRelatedTests to know which tests Jest will run.

--logHeapUsage

Logs the heap usage after every test. Useful to debug memory leaks. Use together with --runInBand and --expose-gc in node.

--maxWorkers=<num>

Alias: -w. Specifies the maximum number of workers the worker-pool will spawn for running tests. This defaults to the number of the cores available on your machine. It may be useful to adjust this in resource limited environments like CIs but the default should be adequate for most use-cases.

--noStackTrace

Disables stack trace in test results output.

--notify

Activates notifications for test results. Good for when you don't want your consciousness to be able to focus on anything except JavaScript testing.

--onlyChanged

Alias: -o. Attempts to identify which tests to run based on which files have changed in the current repository. Only works if you're running tests in a git/hg repository at the moment and requires a static dependency graph (ie. no dynamic requires).

--passWithNoTests

Allows the test suite to pass when no files are found.

--projects <project1> ... <projectN>

Run tests from one or more projects.

--runInBand

Alias: -i. Run all tests serially in the current process, rather than creating a worker pool of child processes that run tests. This can be useful for debugging.

--setupTestFrameworkScriptFile=<file>

The path to a module that runs some code to configure or set up the testing framework before each test. Beware that files imported by the setup script will not be mocked during testing.

--showConfig

Print your Jest config and then exits.

--silent

Prevent tests from printing messages through the console.

--testNamePattern=<regex>

Alias: -t. Run only tests and test suites with a name that matches the regex. For example, suppose you want to run only tests related to authorization which will have names like "GET /api/posts with auth", then you can use jest -t=auth.

--testLocationInResults

Adds a location field to test results. Useful if you want to report the location of a test in a reporter.

Note that column is 0-indexed while line is not.

{
  "column": 4,
  "line": 5
}

--testPathPattern=<regex>

A regexp pattern string that is matched against all tests paths before executing the test.

--testRunner=<path>

Lets you specify a custom test runner.

--updateSnapshot

Alias: -u. Use this flag to re-record every snapshot that fails during this test run. Can be used together with a test suite pattern or with --testNamePattern to re-record snapshots.

--useStderr

Divert all output to stderr.

--verbose

Display individual test results with the test suite hierarchy.

--version

Alias: -v. Print the version and exit.

--watch

Watch files for changes and rerun tests related to changed files. If you want to re-run all tests when a file has changed, use the --watchAll option instead.

--watchAll

Watch files for changes and rerun all tests when something changes. If you want to re-run only the tests that depend on the changed files, use the --watch option.

--watchman

Whether to use watchman for file crawling. Defaults to true. Disable using --no-watchman.

© 2014–present Facebook Inc.
Licensed under the BSD License.
https://facebook.github.io/jest/docs/en/cli.html